Infinova Categories
Copyright © 1993-2016 The Infinova Group.
-
Serving Security Industry with
-
-
Products
V1421 MN-A2
Serving Security Industry with Technology and Dedication
Specialized Products
Infinova V1421MN series HD network explosion proof camera boasts of HD network video output up to 1920×1080@30fps, adopts explosion proof shield design and provides users with a set of full digital live image acquisition system featuring high definition, high frame rate, high signal-noise ratio and high assurance
V1421MN series camera boasts of built-in 22X HD integrated network camera module, and supports H.265/H.264/M-JPEG dual encoding, three-code stream HD video view. The user-friendly GUI interface design enables users to configure camera parameters conveniently via network.
This camera adopts explosion proof shield design, which can protect the webcam and the lens from damaging themselves under the outside explosion environment. The explosion proof shield structure as a whole is in cylindrical shape. The front end is flange cover while its rear end is cable flange cover. Window glasses made of toughened glasses are compressed on the flange cover by junk ring and sealed by specified sealant with O-ring. Rear cover is connected to the flange of cylinder through screws and is sealed by O-ring with specified rubber sealing ring. The base is linked to the cylinder by stainless steel hoop band.
All products shall meet the provisions of standard IEC60079-0: 2007 and IEC60079-1: 2007. They can be applied to the explosion environment (excluding mines) caused by the mixture of combustible gases and air. Boasting of IP66, the dust proof and water proof environmental rating, it means the dust cannot intrude into the products and there will be no damage to products when using water to clean them.
- Features
- Order Info
- Specifications
- Download
- Inbuilt 22X HD integrated camera module
- 1/1.9" large area progressive scanning CMOS sensor
- ICR infrared filter type automatic switch for day/night surveillance
- Starlight-level ultra-low illumination: 0.0001 lux
- Supports multi-frame composite pattern wide dynamic and the maximum dynamic range is 120dB
- HD network video output: 1920x1080@30fps
- H.265+M-JPEG or H.264+M-JPEG video encoding, three streams
- Bi-directional audio, G.711a/G.711u/AAC standard optional
- Supports electronic amplification.
- Two alarm inputs and one alarm output
- Supports built-in storage and NAS storage.
- Supports alarm recording and alarm snapshot.
- Supports PC recording
- Supports motion detection, 4 detecting areas dividable
- Supports multiple alarm-triggered ways, such as IO input, motion detection, mask alarm, smart analysis, SD card removal, network disconnection, heartbeat loss etc.; supports flexible alarm associated configurations, such as I/O output, email, FTP picture-uploading, audio, and TF card recording
- Supports Region of Interest (ROI) for which 8 regions can be divided
- Allows multiple users to perform live access and parameters settings via Web Server
- Compatible with Infinova digital video surveillance software and convenient to integrate with other video surveillance software
- Supports ONVIF Profile S standard
- Provides standard SDK, easy to integrate with other digital system
- Supports remote network upgrade
- Applicable for the first and second dangerous places which contain the explosive mixture constituted by T1~T6 group, A, B and C grade, II class combustible gases/vapors and air
- IP66 rating
- Using fixed bracket to mount or adjustable wall bracket V1665-W1 to mount
- Window glass of front housing uses tempered glass while the main body and base use stainless steel
Mounts
| Technical Specifications | |
| Lens Parameter | |
| Optical Zoom | 22X |
|
Aperture/Focal Length |
F1.5~F3.4, f=6.36~138.5mm |
| Angle of View | 70° (Wide) ~ 3.76° (Tele) |
| Minimum Work Distance | 0. 3m (Wide) ~ 1.9m (Tele) |
| Camera Parameter | |
| Image Sensor | 1/1.9" Sony progressive scanning CMOS sensor |
| Valid Pixel | 2MP |
| S/N | >55dB |
| Day/Night Switch | ICR |
| Sensitivity |
Color mode: 0.001 lux @ F1.5 (AGC ON) B/W mode: 0.0001 lux @ F1.5 (AGC ON) |
| Camera Function | |
| Iris | Auto/Manual/Manual priority |
| Focus | Auto/Manual/Manual priority |
| Shutter | Auto/Manual (1/1-1/32000s scalable) |
| Slow Shutter | Available |
| WDR | Supports multi-frame composite pattern wide dynamic with a range up to 120dB |
| Image Mirror | Vertical/horizontal |
|
Digital Noise Reduction |
3D |
| White Balance | Auto/Manual/Outdoor |
| AGC | Available |
|
Backlight Compensation |
On/Off |
|
Highlight Compensation |
On/Off |
| Image-stabilization | On/Off |
| Defog | Available |
| Others | Brightness, sharpness, saturation, contrast, chroma adjustable |
| Motion detection | Up to 4 detection areas |
| Privacy Mask | Up to 4 areas |
| ROI | Up to 8 regions |
| Electronic Amplification | Available |
| Video | |
| Video Compression |
H.265 /H.264 switchable M-JPEG independent encoding |
| Encoding Capability |
1080P@30fps+720P@30fps +MJPEG1080P@5fps |
| Output Date Rate |
Variable bit rate; Constant bit rate: 256Kbps ~ 1000Kbps |
| Network Delay | <300ms |
| Audio | |
| Audio Compression | G.711a/G.711u/AAC |
| Sampling rate | 8KHz, 16KHz |
| Audio Port |
1 input, Linear level, Resistance: 1kΩ; 1 output, Linear level, Resistance: 600 Ω |
| Intelligent Functions | Supporting cross-line detection and region intrusion detection |
| Alarm | |
| Alarm Port | 2 alarm inputs, 1 switching value output |
| Alarm Input | I/O input, motion detection, video tampering, smart analysis, SD card removal, network disconnection, heartbeat loss |
| Link | I/O output, email, FTP picture uploading, audio, TF card recording |
| Built-in Storage | Available, 128GB Micro SD/SDHC/SDXC card recommended |
| System Operation | |
| Operating System | Supports Windows XP, Windows Vista, Win7, or Win8 operating system |
| Browser | IE7, IE8, IE9, IE10, IE11 |
| Access Protocol | ONVIF2.4, CGI |
| Web Server | Available |
|
Remote Network Upgrade |
Available |
| Password Protection | Available |
| IP Indicator | |
| Network Interface | 1*RJ45 10/100M self-adaptive Ethernet port |
| Network Protocol | IPv6, TCP, UDP, IGMP, DHCP, FTP, SNMP, SMTP, NTP, RTP, RTSP, RTCP, HTTP, HTTPS, TSL, SSL, QoS, PPPoE, DNS, DDNS, ARP, ICMP, UPnP |
| Electricity Indicator | |
| Power Supply | 24VAC/PoE+(IEEE802.3at type2 Class4, power over pairs 1/2(-)and 3/6(+) or 4/5(+)and 7/8(-)), 110VAC or 240VAC |
| Power Consumption | 25W (max.) |
| Environment Indicator | |
| Operating Temperature | -40°F~140°F (-40°C~+60°C) |
| Operating Humidity | 0~95% RH (+25ºC) |
| Installation Mode | Wall mount, Pole Mount, and Corner Mount |
| Unit Weight | 33.07 lbs (14kg) |
| Shipping Weight | 30.87 lbs (15kg) |
| Applicable Environment | the first and second dangerous places which contain the explosive mixture constituted by T1~T6 group, A, B and C grade, II class combustible gases/vapors and air; |
| Certifications and Approval | |
| Product Certifications | CNEx, ExdIICT6, IECEx, ExdIICT6, CCOE/PESO1 CE/EMC: EN55022, EN55024, EN61000-3-2, EN61000-3-32; CE/LVD:EN 60950-13 FCC: PART 15 Subpart B Class A4 |
| Certificate No.: | 1P387612/1; 2CTL1611168101-EC, CTL1611308101-EC; 3CTL1611308101-SC; 4CTL1611168101-FC, CTL1611308101-FC. |